Product Description
LT Type Coupling With Elastic Sleeve And Pin(GB/T4323-2002)
Application:
1.LT type shaft coupling with elastic sleeve and pin are widely used in various mechanical and hydraulic fields, can adapt positive and negative changeful start frequent occasions.
2.Printing machinery / Packing machinery / Wood-working machinery etc large-scale mechanical equipment.
Design feature:
1.Because of elastic sleeve distortion and the teeth clearance between ring holes of half-coupling,the coupling has some compensatory of relativity shir and isolation properties.
2.Working temperature is -20ºC~+70ºC.
3.The marking method of Keyway forms and shaft holes size must be in accord with GB/T3852-1997.
Basic Parameter And Main Dimension(GB/T4323-2002)
| Type | Nominal torque N·m |
Speed rpm |
Bore diameter (mm) d1,d2,dz |
Length of bore(mm) | D | A | S | Limited compensation | Mass kg |
Rotary Inertia kg·m2 |
|||||
| Y Type | J,J1,Z Type | Radial mm |
Angle | ||||||||||||
| Iron | Steel | Iron | Steel | L | L1 | L | mm | ||||||||
| LT1 | 6.3 | 6600 | 8800 | 9 | 9 | 20 | 14 | 71 | 18 | 3 | 0.2 | 1°30´ | 0.82 | 0.0005 | |
| 10,11 | 10,11 | 25 | 17 | ||||||||||||
| 12 | 12,14 | 32 | 20 | ||||||||||||
| LT2 | 16 | 5500 | 7600 | 12,14 | 12,14 | 32 | 20 | 80 | 18 | 3 | 0.2 | 1°30´ | 1.20 | 0.0008 | |
| 16 | 16,18,19 | 42 | 30 | 42 | |||||||||||
| LT3 | 31.5 | 4700 | 6300 | 16,18,19 | 16,18,19 | 42 | 30 | 42 | 95 | 35 | 4 | 0.2 | 1°30´ | 2.20 | 0.571 |
| 20 | 20,22 | 52 | 38 | 52 | |||||||||||
| LT4 | 63 | 4200 | 5700 | 20,22,24 | 20,22,24 | 52 | 38 | 52 | 106 | 35 | 4 | 0.2 | 1°30´ | 2.84 | 0.0037 |
| – | 25,28 | 62 | 44 | 62 | |||||||||||
| LT5 | 125 | 3600 | 4600 | 25,28 | 25,28 | 62 | 44 | 62 | 130 | 45 | 5 | 0.3 | 1°30´ | 6.05 | 0.012 |
| 30,32 | 30,32,35 | 82 | 60 | 82 | |||||||||||
| LT6 | 250 | 3300 | 3800 | 30,35,38 | 32,35,38 | 82 | 60 | 82 | 160 | 45 | 5 | 0.3 | 1°00´ | 9.57 | 0.571 |
| 40 | 40,42 | 112 | 84 | 112 | |||||||||||
| LT7 | 500 | 2800 | 3600 | 40,42,45 | 40,42,45,48 | 112 | 84 | 112 | 190 | 45 | 5 | 0.3 | 1°00´ | 14.01 | 0.055 |
| LT8 | 710 | 2400 | 3000 | 45,48,50,55 | 45,48,50,55,56 | 112 | 84 | 112 | 224 | 65 | 6 | 0.4 | 1°00´ | 23.12 | 0.1340 |
| – | 60,63 | 142 | 107 | 142 | |||||||||||
| LT9 | 1000 | 2100 | 2850 | 50,55,56 | 50,55,56 | 112 | 84 | 112 | 250 | 65 | 6 | 0.4 | 1°00´ | 30.69 | 0.2130 |
| 60,63 | 60,63,65,70,71 | 142 | 108 | 142 | |||||||||||
| LT10 | 2000 | 1700 | 2300 | 63,65,70,71,75 | 63,65,70,71,75 | 142 | 108 | 142 | 315 | 80 | 8 | 0.4 | 1°00´ | 61.40 | 0.660 |
| 80,85 | 80,85,90,95 | 172 | 132 | 172 | |||||||||||
| LT11 | 4000 | 1350 | 1800 | 80,85,90,95 | 80,85,90,95 | 172 | 132 | 172 | 400 | 100 | 10 | 0.5 | 0°00´ | 120.70 | 2.122 |
| 100,110 | 100,110 | 212 | 167 | 212 | |||||||||||
| LT12 | 8000 | 1100 | 1450 | 100,110,120,125 | 100,110,120,125 | 212 | 167 | 212 | 475 | 130 | 12 | 0.5 | 0°00´ 0°00´ |
210.34 | 5.39 |
| – | 13 | 252 | 202 | 252 | |||||||||||
| LT13 | 16000 | 800 | 1150 | 120,125 | 120,125 | 212 | 167 | 212 | 600 | 180 | 14 | 0.6 | 0°00´ | 419.36 | 11.58 |
| 130,140,150 | 130,140,150 | 252 | 202 | 252 | |||||||||||
| 160 | 160,170 | 302 | 242 | 302 | |||||||||||
NOTE:
1.Coupling weights in the sheet are calculated according to the minimum diameter and maximum length of the shaft hole.
2.Short overloading can not exceed 2 times rated normal torque.
3.Type of shaft holes, the lengths of L and L1 also can be produced as customer requirements.
4.Rotational inertia are similar value.
Product Show
♦Other Products List
| Transmission Machinery Parts Name |
Model |
| Universal Coupling | WS,WSD,WSP |
| Cardan Shaft | SWC,SWP,SWZ |
| Tooth Coupling | CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK |
| Disc Coupling | JMI,JMIJ,JMII,JMIIJ |
| High Flexible Coupling | LM |
| Chain Coupling | GL |
| Jaw Coupling | LT |
| Grid Coupling | JS |
♦Our Company
HangZhou CHINAMFG Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.
Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective.
♦Our Services
1.Design Services
Our design team has experience in cardan shaft relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.
2.Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping
3.Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.
4.Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the market.
5.Quality Control
Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.
♦FAQ
Q 1: Are you trading company or manufacturer?
A: We are a professional manufacturer specializing in manufacturing
various series of couplings.
Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks of PDF or AI format.
Q 3:How long is your delivery time?
Generally it is 20-30 days if the goods are not in stock. It is according to quantity.
Q 4: Do you provide samples ? Is it free or extra ?
Yes, we could offer the sample but not for free.Actually we have a very good price principle, when you make the bulk order then cost of sample will be deducted.
Q 5: How long is your warranty?
A: Our Warranty is 12 month under normal circumstance.
Q 6: What is the MOQ?
A:Usually our MOQ is 1pcs.
Q 7: Do you have inspection procedures for coupling ?
A:100% self-inspection before packing.
Q 8: Can I have a visit to your factory before the order?
A: Sure,welcome to visit our factory.
Q 9: What’s your payment?
A:1) T/T.
♦Contact Us
Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Standard Or Nonstandard: | Standard |
|---|---|
| Shaft Hole: | 19-32 |
| Torque: | 70-80N.M |
| Bore Diameter: | 19mm |
| Speed: | 10000r/M |
| Structure: | Flexible |
| Samples: |
US$ 500/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Are There Any Safety Considerations When Using Pin Couplings in Rotating Machinery?
Yes, there are several safety considerations to keep in mind when using pin couplings in rotating machinery. These considerations are essential to ensure the safe and efficient operation of the equipment and to protect personnel working in the vicinity. Here are some key safety points to consider:
- Guarding: When installing pin couplings, it is crucial to provide adequate guarding around the coupling area. This helps prevent accidental contact with the rotating coupling components, such as pins and hubs, which could cause severe injuries.
- Maintenance and Inspection: Regular maintenance and inspection of the pin coupling are vital to identify any signs of wear, misalignment, or damage. Any worn or damaged components should be replaced immediately to prevent coupling failure, which could lead to sudden equipment shutdown or safety hazards.
- Proper Alignment: Ensuring precise alignment of the connected shafts is crucial to the safe operation of the pin coupling. Misalignment can lead to increased stresses and premature wear on the coupling components, resulting in potential failures.
- Torque and Speed Limits: Adhering to the manufacturer’s recommended torque and speed limits for the pin coupling is essential for its safe operation. Exceeding these limits can lead to overloading and failure of the coupling.
- Environmental Considerations: Take into account the operating environment when selecting a pin coupling. Extreme temperatures, corrosive atmospheres, or harsh conditions may require special materials or coatings to ensure the coupling’s integrity and prevent premature failure.
- Training and Awareness: Operators and maintenance personnel should receive proper training on the safe handling, installation, and maintenance of pin couplings. Awareness of potential hazards and safety protocols is crucial for the safe use of rotating machinery.
- Emergency Shutdown: Install emergency shutdown systems that can quickly stop the rotating machinery in case of any safety concerns or abnormal conditions.
- Compliance with Regulations: Ensure that the use of pin couplings complies with all relevant safety and industry regulations and standards.
By taking these safety considerations into account and implementing proper safety measures, the use of pin couplings in rotating machinery can be done safely and effectively, mitigating potential risks and ensuring a safe working environment for personnel.
How Does a Pin Coupling Handle Angular, Parallel, and Axial Misalignment?
A pin coupling is designed to handle different types of misalignment, including angular, parallel, and axial misalignment. The unique construction of pin couplings allows them to accommodate these misalignments without compromising the efficiency and performance of the connected equipment.
1. Angular Misalignment: Angular misalignment occurs when the axes of the driving and driven shafts are not parallel but intersect at an angle. Pin couplings can tolerate angular misalignment because of their flexible and floating pin design. The two coupling halves are connected by a series of pins, which can pivot and move within the pin holes. This flexibility allows the coupling to bend slightly, adjusting to the angle of misalignment between the shafts.
2. Parallel Misalignment: Parallel misalignment happens when the axes of the driving and driven shafts are parallel, but they are laterally displaced from each other. Pin couplings can handle parallel misalignment to some extent due to the floating nature of the pins. The pins can move laterally within the pin holes, allowing the coupling to adapt to the offset between the shafts.
3. Axial Misalignment: Axial misalignment occurs when there is a linear displacement along the axis of one shaft concerning the other. While pin couplings primarily focus on handling angular and parallel misalignment, they may offer limited axial misalignment capabilities. The floating pins provide a small degree of axial movement, but excessive axial misalignment is best avoided to prevent additional stresses on the coupling.
It is important to note that while pin couplings can accommodate some degree of misalignment, excessive misalignment should be avoided to prevent premature wear and potential failure of the coupling and connected equipment. Regular inspection and maintenance can help identify and address any misalignment issues, ensuring the optimal performance and longevity of the pin coupling in power transmission applications.
Understanding Pin Couplings and Their Functionality
A pin coupling, also known as a shear pin coupling, is a type of mechanical coupling used to connect two rotating shafts in a mechanical system. It is designed to transmit torque while allowing for a limited amount of angular misalignment between the shafts. The primary function of a pin coupling is to protect the connected equipment from torque overload and prevent damage to the shafts and other components in case of sudden shock or overload.
How a Pin Coupling Works:
A typical pin coupling consists of two hubs, one on each shaft to be connected, and a series of pins that pass through the hubs to join them together. The pins are usually made of a softer material than the hubs, such as brass or aluminum, to act as sacrificial elements. The number and size of the pins depend on the coupling’s torque rating and the required angular misalignment capacity.
When the shafts are misaligned, the pins experience shear stress as they bend under the applied load. In normal operating conditions, the pins remain intact and allow the torque to transfer from one shaft to another. However, in the event of an overload or excessive misalignment, the pins will shear off, preventing the transmission of excessive torque and protecting the connected equipment from damage.
After shearing, the damaged pins can be easily replaced, and the coupling can be put back into service without major repairs to the equipment. This feature makes pin couplings particularly suitable for applications with varying operating conditions and environments where shock loads or sudden overloads may occur.
Advantages of Pin Couplings:
– Protection against Overload: The shear pins act as a safety feature, protecting the connected equipment from excessive torque and sudden shocks.
– Misalignment Tolerance: Pin couplings can accommodate a limited amount of angular misalignment between the shafts.
– Easy Replacement: After shearing, the damaged pins can be quickly replaced, reducing downtime and maintenance costs.
– Versatility: Suitable for a wide range of applications, including pumps, compressors, and other industrial machinery.
– Cost-Effective: The sacrificial pins are cost-effective components that can be easily replaced, avoiding costly repairs to the main equipment.
Limitations:
– Pin couplings have lower torque capacities compared to some other coupling types, such as gear couplings or rigid couplings.
– The need to replace the shear pins after each failure may lead to frequent maintenance requirements in applications with frequent overloads or misalignments.
In summary, pin couplings offer a reliable and cost-effective solution for torque transmission and protection against overloads in various mechanical systems. Their ability to accommodate misalignment and absorb shock loads makes them suitable for a wide range of industrial applications.
editor by CX 2024-04-13
by
Leave a Reply